Search this blog

Monday, January 26, 2009

Column Knobs Will Not Tighten


from Charles Hoot- "To say that I was wonderfully amazed to find you internet page for parts for the Tiltall would be an understatement! Just hope your service is still currently available.

"Great idea for replacing the column with a standard threaded one. But my lingering problem (that too is an understatement considering I purchased mine in about 1968) is locking the post in position - mainly vertically. Replacing the two knobs for the post with the new, broader style knobs might help to up the torque. Except that the real problem appears to be that the "paper/fiber" bushing material that guide the post in its sleeve does not seem to perform its contradictory job any more - it still promotes the sliding of the post, but not the gripping of it. At least that's my surmise. Do you have any suggestions? Do you sell the bushings? If not, do you know what readily available material could be substituted for it?"

Dear Charles - I don't presently have the bushing you need, nor am I certain that the bushings now made in Oliver Yang's production will work on all earlier Tiltall iterations until we get some current pieces out "into the field".

Here is the suggestion I have made many times and everyone says it works well- using your existing bushing as both a template and sample, visit a good plastics or hobby shop and look for a nylon, teflon or similar sheeting that you can use as a replacement - perhaps, now that you think about it you probably have a similar material lying around already - but the critical (and obvious) point is that the new "bushing" needs to be THICKER than the old one!! Use the old bushing to size the new one (ie "template") to proper size. You can see your quest in the exploded drawing below - part '024'.

There is a similar question about replacing the original tape at the bottom of the tube that the column slides through - this tape was to steady the column, not to lock it. A modern substitute that seems to work well is a strip of adhesive 'loop' velcro available from a sewing/fabric shop. Cut a strip long enough to go around the inner circumference.

NEW-  I have a  few of the current clear tripod "bushing" described above [01Oct09] for $4 w/postage.

Friday, January 23, 2009

Changing the Tripod Platform or 1/4-20 Tripod Screw


Several Tiltall photogs have bent their tripod platform or have somehow "altered" their tripod screw. Both can be changed - not easy, but not too difficult. You will need either a new platform (#1 above) or new threaded screw (#2 above), plus a new replacement rubber pad (#3, 3a above). We will also need a small Philips screw driver, a small Dremel tool and epoxy.

Remove the old rubber pad on top of your camera platform to expose four screw placements filled with resin. Remove resin with Dremel with appropriate grinding shape. Remove screws. Do not loose the spring that is about jump up and run off. Remove old tripod screw from knurled knob (#4 above) by carefully pressing it out of the knob. Replace with new thread, taking care that the fitting in the knurled knob is secure - a little epoxy might be in order here. Replace spring. Replace the tripod platform with four screws. Fill in the four divots with epoxy or similar. Apply new rubber pad to platform. Exploded drawing maybe useful to get a sense of the process.

I have tripod screw / knurl knob assemblies and will try to replace the above photo with better stepped photos.

All Tiltalls (do not) have a MonoPod



With the present production (KingHome) of Tiltall, one of the tripod legs is removable (#1 from #3 above), usually the tripod leg marked with the logo or label. Unscrew the small tripod "platform" (#2 above) (TEP6) at the bottom of the column. Screw TEP6 into the top of the leg and presto! whamo! a monopod for still or to stabilize video motion.  I believe this is true with the Uniphot and Star-D version, but (see next) it does not seem to be the case with Leitz and the original Marchioni design. 

New EDIT: Recent visit (Oct 09), by a Leitz Tiltall owner together the photo post above, seem to indicate that the TEP6 platform was a recent iteration - my guess is during the Star-D period as the Los Angeles company, Star-D added a whole number of "un-orthodox" "improvements" to Tiltall taken from innovations available on their other tripods (as example, a quick camera release).  The stop at the bottom of the Marchioni and Leitz versions, at least the older Leitz versions DO NOT accept the TEP6 platform.  Your comment can be added below.

Tiltall Explodes



Click on this photo to "explode" it even more.

Thursday, January 22, 2009

The Tiltall Preface - a brief history

This page now updated here. See comments below.

The Tiltall Preface:  Pushcart to Inventor -
Uncle Marchioni Makes Good

From http://www.zingersicecream.com/history.htm
      Italo Marchioni emigrated to the United States in the late 1800s, and although he lived in Hoboken, NJ for a time his fame resides solely in New York City. He began his business selling his homemade lemon ice from a single pushcart on Wall Street, but his business quickly grew into many carts.
      Although he was successful he still had a small problem that was causing him to lose money. At the time, most ice cream from vendors was sold in serving glasses called "penny licks" (because you'd lick the ice cream from the glass, and it cost a penny to do so).  There was a major problem with sanitation (or the lack thereof), but Marciony's problem was that many people would accidentally break the glasses, or not so accidentally walk off with them.  His first solution was to make cone-like containers out of paper which worked fine until he was hit with a stroke of genius. He came up with the idea of making an edible container for his cool treat.
So, in 1896 he began baking edible waffle cups with sloping sides and a flat bottom - shaped like his serving glass - and it was an instant hit.
     On September 22, 1903, he filed a patent application out of the city and state of New York, and U.S. Patent No. 746971 was issued to him on December 15, 1903. So although he lived in Hoboken for a time, while selling his wares in the big city, and although my home town web sites claims him as our own, his patent clearly states that he is "Italo Marciony of New York."
More details at the New Jersey Institute of Technology:

Brothers Marchioni Make Good
From Leitz Tiltall Tripod Story ca. 1975

     As time passed and the Marchioni business grew, the two brothers, Caesar and Mark began pursuing their own personal interests in their free time away from the store. Caesar had been given a camera in 1918 and he spent much of his time taking and developing pictures, while Mark’s interest led him to a specialty in industrial design.
     Until the start of the depression, the Marchioni Ice Cream business flourished but, as many businesses felt the pinch of the depression year the Marchioni brothers began to search for ways to augment their dwindling business and incomes. As Caesar turned more and more toward photography, he became frustrated with his tripod which while relatively steady, was heavy and since it didn’t feature a tilting head, limited him to straight-on photographs.
     Initially, Caesar and Mark turned their energies to developing a practical tripod head, one that would fit the cameras of the day and, most important, would allow the photographer to tilt the camera on the tripod and photograph his subjects from the best or more creative angles. They settled on a design, put what savings they had into a mini-machine shop and began manufacturing their unique product.
    Door-to-door sales of this new product didn’t break any records during the depression, but it kept the brothers busy, and began to develop into a modest business when the outbreak of World War II brought the business to a halt due to lack of materials. The brothers turned their skills to the war effort, and subcontracted to build precision tool parts for divisions of Bendix for the duration of the war.

The Tiltall Arrives

     After the war, the brothers decided the best thing they could do for their business was to produce the complete tripod, and not just the tiltable head. Tripods of the day could be divided into two main categories—the wooden ones, which were usually quite sturdy, but sometimes warped or dried and became brittle, or the metal tripods, which had a deserved flimsy reputation.
The two brothers began working on a design for a metal tripod: one that was solid, light, and could effectively maximize the versatile tilting head. In 1946, after considerable work, the first Tiltall was produced.

The Tiltall Tradition

From 1946 to 1973, the Tiltall production remained in the hands of the Marchioni brothers. Production was purposely limited to allow the brothers an opportunity to personally supervise and control all steps in the production cycle and assure a product of consistent quality. The files of the brothers are filled with letters of testimonial to the quality and superb performance of the Tiltall tripod demonstrating the success of this approach. Also, in spite of virtually no budget for advertising, Tiltall’s fame spread and the orders for new tripods far exceeded the brothers’ ability to produce them—even in the leanest years of our economy.

Tiltall and Leitz

Early in 1973, Gene Anderegg, from E. Leitz, Inc., in Rockleigh, New Jersey, who had known of the Tiltall for many years, contacted the Marchionis to discuss a possible affiliation. Leitz had an enviable reputation in the scientific world as the builder of the highest quality microscopes, and in the photographic world as the creator of the famous Leica 35mm system of photography.
The Marchionis felt that the time was right to retire and had been searching for someone to carry on the tradition they had established with such great care. The result, the Leitz reputation was enough proof for the Marchionis and a deal was consummated. And so, the tripod works were moved from Rutherford, New Jersey, to Rockleigh, New Jersey, where the Marchionis personally trained the staff now carrying on the work that began because a loving father gave his son a camera.  -here ends the Leitz' history.
Tiltall and Uniphot- ca.1985-2000  Star-D and Tiltall ca. 1985-2002   King Home and Tiltall - 2004 to Present
If you can add to or correct this history, please comment below