Search this blog

Tuesday, February 7, 2017

NEW Telescoping Headless Column

A telescoping monocolumn option for folks wishing to add a monoball or a video fluid head to their classic Tiltall tripod, but who did not want to destroy their Tiltall head and column assembly in the process.
  
Introduced in August 2012 - the fourth production of 100 pieces is just arriving. Nice response, thank you all.

Telescoping Monocolumn concept:  Shown left and below.  The clever Marchioni brothers used the same diameter tube stock in their original Tiltall head and column assembly as they used in the upper, and largest, leg section.  An efficient use of materials and necessary extrusion dies.  Ofcourse the outer leg section telescopes to the next diameter down, and etc.  So with just a bit of lateral thinking - ergo - why not a telescoping monocolumn using the existing "leg" tubes? 

Color: No option! Everyone seems to prefer black - so with Henry Ford's 1909 suggestion, "You can have any color as long as it's black."

Caveat!: (look it up), I am the leading proponent to shoot ONLY from that top apex (meeting point) of the three legs and never, ever, never use an extension of a column - period - much less a telescoping column - OMG!  Some column users have questioned the need of a telescoping column - but unextended, such a column is also a double walled column aka a heavier column and it just probably dampens any vibrations better than a single walled column.  But, BUT, if ever pressed to need to be just a little bit higher, well, then, OK, extend the telescoping feature you just happen to be carrying aboard your Tiltall.  Price: $55 includes USPS Priority service within USA. Note: The 3/8"-16 "top" thread stud (shown left) can be reversed to a 1/4"-20 thread.  Length/Diameter/Weight specs follow instructions.

Last, Yes, we have NO Monoball Heads - None, Nada, Zip - Again, we do not plan to market any monoballs or video heads.  We believe this a very, very personal decision.  And, though, China's monoball designs are gaining on USA and EU, they ain't there yet. Take a look at our earlier blog on this subject for suggestions.

                                                                    ***************
Before you order take a look at these instructions to get an idea of how to assemble:
      Step 1) Remove bottom column stop - Remove ring (Marchioni, Leitz) or solid metal stop (Leitz, Unifot) or TEP6 1/4"-20 camera placement (Unifot, StarD, KingHome) from the bottom of your existing column.  Loosen column handles, then raise and remove your existing column.
      Step 2) INSTALL NEW COLUMN. Remove the TEP6 1/4"-20 camera placement from the "bottom" of your new headless monocolumn and reverse the installation as above.  This is a hand job, no pliers.
      Step 3) INNER BUSHING. Your existing inner bushing strip - may or may not work with the new column.  Leitz in particular is thicker.  Dont mislay the existing inner bushing as it is your template for the new one.  [Also, dont lose track of it, so you can again use the original column/head.]
     Step 4) FIND New Bushing. Now in less than 15 minutes you are going to find that new bushing - make a slow wander of your studio/workshop and/or home - think: plastic milk carton; slice of a plastic 35mm film can or the film itself - 35mm, better 4x5; a plastic 8.5 x11 inch term report / presentation cover. You are looking for nylon-ish, flexible, a little "tooth" perhaps - a stiff plastic bag - a candy wrapper or other wrapping material.  Cut to match dimensions and install in groove - you may need to make a couple or three tries.  I could send you the strip bushing, presently made, but it would be too thin or too thick.  Let me know what you ended up using and I will add to the blog. 
     Step 5) TOP PLATE - "top" 3/8"-16 stud (used with most ballheads/videoheads) can be flipped over to switch to a 1/4"-20 stud (used with a few heads and quickreleases).  Note two small allen studs, one is a registration pin - the other, the stop to allow the stud switch over. Unscrew top allen, flip stud, screw down and secure with allen stud.
     SPECS: Diameter of larger section 32.06mm 1.262 inches; Diameter of telescoping section 25.40mm 1.000 inch; Overall collapsed length - 54.5mm 21.5 inches; Overall extended length - 97.5mm 38-3/8 inches; Weight - 0.44kg 15.4 oz   Let me know (by email) where I am not clear - this instruction business is never easy.